Patrs - Acculight System


Duct Base 6 feet / 8 feet

	D18001-6 [6 feet = 1,800mm] D18001-8 [8 feet = 2,430mm]

- Attach Answer Kit on the duct base rails. Two stainless-steel rails are integrated with a plasticbase. - The duct base can be cut with a high speed cutter, rachet cutter or other tool. Affix it using double-sided adhesive tape, screws, rivets, etc. - Duct base is common parts for ACC18xxx series and ACC10040.

Inclining duct base 6 feet

D18004

- Answer kit installed at a high/low position ca be titled 30 degrees for a clearer view. The auxiliary base can be cut with a high speed cutter, rachet cutter or other tool. Affix it using double-sided adhesive tape, screws, rivets, etc., and then press in the duct base.
- Duct base is common parts for ACC18xxx series and ACC10040.

Duct End for Low profile devices

For 4 digits standard Answer Kit (ACC10040)

E10001	E10002	E10003	E10004
Duct end for 10000	Duct end for 10000 + P with power cap	Inclining duct end CAP10L	Inclining duct end CAP10R
E10005	E10006
Inclining duct end CAP10L + P with power cap	Inclining duct end CAP10R + P with power cap

- Attach the duct end to the end of the duct base.Select the plastic molding type, the board type that comes with a built-in board and cable.
- Alternatively, select the flat type or, the inclined type for use with an inclined auxiliary duct base. The inclined type is available in right-side and left-side specification.

Duct End for High profile devices

For the others (ACC18xxx)

E08001	E08002	E08003	E08004
Duct end for 8000	Duct end for 8000 + P with power cap	Inclining duct end 8000L	Inclining duct end 8000R
E08005	E08006
Inclining duct end 8000L + P with power cap	Inclining duct end 8000R + P with power cap

Duct cover 1800mm / Block joiner

D10002 D18005

D18005

D08003 D18005

[Enlarge]

- The duct cover can be attached over an exposed area of the duct base, such as between Answer Kits.
- It can be cut with a high-speed cutter, ratchet or other tool.
- Block joiner adjusts the hight of cover or Answer Kit from Low to High.


	Acculight System is the picking system of Pick-To-Light and Put-To-Light. We provide the work support system utilizable for improvement in the productivity of all physical distribution work.


	We are receiving the question about other system management examples and a product at any time. Please do not hesitate to ask.

	[Contact in English] 2-4-4 Nishi-Tenma, Kita-ku, Osaka 530-8565, JAPAN TEL:+81-6-6365-3250 FAX:+81-6-6365-7150
	[Headquarters] 3-2-3 Mandai-Mita Bldg.2F Mita Minato-Ku, Tokyo 108-0073, JAPAN TEL:+81-3-6400-5155 FAX:+81-3-6400-5157 Email:cap00@cap-ai.jp